Monday, January 19, 2015

The Plackart or Kidney Belt

The Plackart or Kidney Belt




Not all pieces of armor are complicated to make. Basically the plackart can be an extra wide belt. It can be made with extra thick leather, plates of steel sewn into pockets around it known as brigandine, segmented steel plate, or any number of armor types. The basic idea is to protect the lower torso while still allowing freedom of movement to bend at the waste. That is why torso armor like a breast plate is built a little short of covering the entire torso in non flexible armor, stopping somewhere just past the bottom of the rib cage. 






Notice how in a steel plate plackart that it is shaped to extend up under the breast plate and offer full protection of the stomach and solar plexus. Each piece of the armor puzzle works together in segments to protect and it yet still allow the body to bend where it needs to. 

Secondarily the plackart is made to hold the next set of pieces down called the Tasset and sometimes the Fauld. The tasset protects upper legs, buttocks, and genitals. The Fauld is a piece that protects the hips. It can be a transition between the plackart and the tasset but it is usually only seen in plate mail.



My plackart is a really simple design. It is essentially a 7 inch wide belt. I made it with separate belts through loops to allow the freedom to attach other things to it.


First I started by cutting out the basic shape. I measured all around my waste and added some extra length. Next I dyed it black and sealed it with a wax sealant to keep the dye from bleeding. 


I then cut four short strips to use as belt loops and I put them on with rivets. Finally I fed belts through the loops. Note when sizing the belt loop put the belt through the loop before punching the holes. The strips should not be completely flat. They should have a little play to allow the belts to pass through.

My belt loops are spaced 12 inches apart with the extremes 36 inches apart. I know that it isn't as fancy as some of the examples that I found online, but I show those to inspire you with the possibilities that armor making can offer. You can make it simple like mine, steam punk, gothic, or fancy.  What's more if you have the money their are numerous sites that sell armor to suit anyone's taste.

I'll continue putting up articles about armor and I'm always happy to help anyone that is interested in learning. Also you might consider going to Tandy Leather. Not only do they sell every thing that a budding armor smith might need to begin making your own stuff, but they also offer free leather crafting classes. Just a thought.

Hope to see you on the field soon.
Thorne the mercenary
Order of the Rose
Armor and weapon smith


Thursday, December 11, 2014

The Viking Weave




This is a very old and simple method of weaving wire that can be used to make necklaces and bracelets. Whether you are looking for some accessories to round out your viking garb or you just want to make some cool looking jewelry this is fun and easy requiring a minimum of tools to accomplish. Here is a really simple piece that I made using some copper wire and a polished stone that I got from the aquarium section of walmart.
Ok so you only need a few things to do this. You need a pair of pliers, a dowel rod or tube, a board with a hole drilled through it, a roll of wire, safety glasses (highly recommended), some beads and/or decorative pieces to add to the wire.

Start by taking some wire and wrapping it around a credit card or gift card. Make six complete loops. Then remove the loops and make tight wrap around the bundle about a third of the way down.
Now spread the loops out into a flower pattern like this and put it over the end of the dowel rod. Make sure to get them evenly spaced then tape the jig in place so that it doesn't move.
Next start looping the wire like this.


You can estimate that the finished length of the chain will be around double the length what it is on the dowel rod. This may differ slightly depending on the size of the dowel that you use verses the size of hole that you use for pulling but you will figure it with a little experimentation.
Once you have the weave to the length that you desire then you feed it through the hole drilled in the board and pull it through with a pair of pliers. This narrows the weave down to the desired diameter and stretches it to length.

Wire types can be almost any wire but some wire will oxidize and turn colors on you. It is possible to find gold or silver plated wire. From craft stores you can find multiple colors of wire and copper wire can be found from most hardware stores. You can also find clasps and beads at craft stores to decorate  your jewelry. Feel free to alternate colors in the weave or you can add yarn, ribbon, beads, or stones to the inside of the tube before pulling it to give color contrast.



The weave can also be wrapped around stones like this to create a center piece or an amulet for the jewelry.

Cool amulets, end pieces, clasps, and beads can be found online or at craft stores. I like Fire Mountain Gems as a resource to get a lot of this stuff.
with a little imagination or some research on line for ideas you can come with a lot of really cool ways to utilize this ancient method for making fine jewelry. You can even experiment by mixing unconventional style together, changing up the number of loops, or doing extra wraps of wire instead of single loops to give a different look.



I hope that you enjoyed this tutorial.
Thorne the mercenary.


Saturday, December 6, 2014

Christmas Tourney an SCA Event

I just came from Christmas Tourney and it was a blast. This is an SCA event and this year they held it indoors at the community center in Elizabethtown, KY. That is just a short drive from Louisville, KY and well worth it. It only cost me $5 to get in and lunch was $5 in the kitchen. They had beef stew, berry tarts, and biscuits. Believe me I ate so much that I had to loosen my belt up a notch. The fighting was action packed and non stop all day. They tournaments of heavy armored fighting like in the fierce battle that I filmed below

They also have Fencing competitions with multiple styles of fencing like single rapier, rapier and main gauche (dagger), and rapier and buckler. I have been told that they do fencing with rapier and cape but unfortunately I didn't see anyone doing this style. It would be interesting to watch.

The real reason to attend one of these events is for the merchants. There are a lot of merchants at SCA events, even a small local event like Christmas Tourney. It is a great opportunity to find high quality and hard to find garb, leather work, crafts, armor, etc. Much of this stuff is one of a kind and the prices are reasonable. I walked away with a nice new pouch for $40 and I found some wool fabric for $5 a yard that I just couldn't pass up. I've been wanting to have a piece of winter garb made for some time and this stuff will be perfect.